Jack Cleveland's bandsaw Jack Cleveland writes: Hi Matthias, I'm a 15 year old woodworker from Portland, Or. I wanted to send you some pictures of my completed 16" bandsaw. It took me about 9 months to complete, but it was well worth the wait. I'd also like to thank you for the comprehensive plans and building instructions, as I was never confused by the dimensions or instructions. Thanks so much, Jack My saw uses a rather large and heavy 1 HP pool pump motor. The motor was 'non reversible' and had CCW rotation, but I was able to reverse it by just swapping the wires of the start winding. Matthias comments: Nice job. Pretty much any motor with a starter winding can be reversed, if you can get at the connections. Very similar to what I did on my bandsaw 3 motor.   Also, I decided to make a hinged enclosure. The top and bottom pieces move independently, and are held on by latches. Bottom enclosure latch at left. For expedience, I used box joints for the drawers and stand frame (made on my geared box joint jig) I added a positive stop to keep the table at 90 degrees   Also, I've built a tilting router lift and box joint jig based on your plans, and I'm planning on making a pantorouter. Matthias comments: Cool. Your workbench also looks kind of familiar :) See also: 16 year old Alex Harris's bandsaw 22 year old Dejan Kovac's bandsaw More reader built bandsaws 15 year old Collin Graver's wooden bicycle 16 year old Chris Laudolff's bandsaw Back to my Woodworking website